Decking choices abound

If you're thinking of a new deck or perhaps rehabbing your old one by replacing those worn deck boards, you have no doubt noticed that you have a whole lot of choices these days. Natural wood, treated wood and synthetics abound, with some pros and cons to each choice. So here's a basic rundown on some of things you might want to consider when making your selection.

Also, remember to ask about fasteners when you make your decking choice. Some types of both natural and synthetic decking materials require specific fasteners to prevent staining, "mushrooming" around the screw head, and other possible problems, so be sure to select the right fastener for the job.

WOOD

Until relatively recently, natural wood was the only option you had for a deck. Today, even with all the choices, wood is still extremely popular, and it has lots of things going for it.

First of all, no synthetic deck board, no matter how well designed and engineered, can match the natural beauty of real wood. The warmth, color and grain variations found in wood enhance a deck, and seem to flow more readily into the outdoor surroundings. Wood is also a nice material to work with. It cuts and machines easily, and is easy to fasten.

On the downside, there is no denying that wood requires some maintenance to keep it looking nice. To keep that new-deck appearance, a deck stain or other treatment should be applied at least every other year. Even if you want to allow the wood to weather naturally to the soft gray color that most wood takes on after a few years, you need to apply some type of moisture and UV protection to help keep the wood from prematurely deteriorating.

When selecting wood for use on an exterior deck, you want to select one that is both weather- and insect-resistant. There are several good choices, with cedar and redwood being the most common and the most affordable. At the upper end of the price spectrum, other beautiful, long-lasting deck woods include mahogany, teak and plantation-grown South American hardwoods such as Ipe (also called ironwood).

Another choice for decking is pressure-treated lumber. Pressure-treating woods such as fir, hemlock, and pine will greatly improve the wood's resistance to weather and insects, so it lasts considerably longer. The treatment process gives the wood a green or brown tint, which some people find attractive and some don't. And while this is still natural wood with all its inherent grain characteristics, there are also small slots at regular intervals along the face of the wood where the treatment chemicals are injected. ...CONTINUED

All rights reserved. This article may not be used or reproduced in any manner whatsoever, in part or in whole, without written permission of Inman News. Use of this article without permission is a violation of federal copyright law.