Security door an easy home upgrade

If you're looking for greater protection for your doors than you can get from deadbolts and other locks, a steel security door may be the perfect solution. Security doors are added to the door frame on the exterior side of any standard exterior doors, similar to adding a standard screen door or storm door. They feature the strength of an all-welded steel framework and cross-bracing, along with an open steel mesh that allows for ventilation while being infinitely stronger than the aluminum or fiberglass mesh in a standard screen door.

Welded steel plates allow for the installation of a deadbolt lock, creating a door that's virtually impervious to kicking, prying, lock-picking and other forms of attempted illegal entry. They're especially well-suited for vacation homes or other homes that may be vacant for extended periods of time.

Now if you're picturing your house looking like the entrance to a bank vault, don't. The doors are surprisingly attractive, with a low-profile frame and wrought-iron-style embellishments that look like most upper-end screen and storm doors, and are typically available in factory-baked gloss white or black paint.

Selecting and installing the door

The door you select needs to be the same size as the size of the door you're installing it over, typically 3 feet wide by 6 feet 8 inches high. Both left- and right-hand swings are available (swing is determined by which side the hinges are on as the door opens away from you), and the swing of the security door needs to be the opposite of the swing of the existing door.

For example, if the existing door is a right-hand swing -- the hinges are on the right as you open the door and swing it away from you to enter the house -- then the security door should be a left-hand swing. Like a storm or screen door, the security door opens out, away from the house rather than into it. That places the knobs for the security door and the existing door on the same side for easier access.

The door comes completely pre-hung in its own frame and hinges, ready for installation. Basic tools are all that are needed, including a level, socket wrench set, drill, and drill bits that are long enough to go all the way through the wall. You'll also need a helper, since these doors are heavy and awkward, and this is definitely a two-person job. ...CONTINUED

All rights reserved. This article may not be used or reproduced in any manner whatsoever, in part or in whole, without written permission of Inman News. Use of this article without permission is a violation of federal copyright law.