Black crud invades whirlpool bath

DEAR BARRY: We just purchased a home and hired a home inspector before closing. He reported no problems with the whirlpool bathtub. But the first time we turned it on, the bath water became filled with black specks. There is some kind of mold or mildew in the pipes, and we haven't been able to remove all of it, not even with bleach. When we called our home inspector, he said that he checks only the working ability of the tub jets and nothing else. If he checked the jets, he must have filled the tub, so how could he have missed the problem? --Annie

DEAR ANNIE: The mold or mildew problem in your whirlpool tub is a common one because the pipes in most whirlpool tubs do not drain very well. When the tub is emptied, water remains in the pipes and becomes stagnant. When this foul brew evaporates, a black residue is left in the lines. Then, when the tub is filled again, the crud is loosened by the water flow, and black particles are washed into the bath water.

more...

To continue reading sign in to your Premium Member account.

Premium Members have full access to all news archives.

Buy Now Purchase 1-year Premium Membership - $149.95

OR

Buy Now Purchase Monthly Premium Membership - $19.95

All rights reserved. This article may not be used or reproduced in any manner whatsoever, in part or in whole, without written permission of Inman News. Use of this article without permission is a violation of federal copyright law.