Don't clean deck with pressure washer
Homeowner's mistake leaves behind 'fuzzy' mess
By Paul Bianchina, Tuesday, March 4, 2008.Q: We just cleaned our cedar deck with a product that smells like bleach. We also used a pressure washer (before reading in your column that we probably shouldn't) and now the deck is gray and fuzzy. We also put on a coating of Thompson's Water Seal, but it didn't help. Is there anything we can do now to make the deck look better? --Gary B.
A: Your first step is to remove the gray appearance and the fine fuzzy layer -- which is actually wood fiber that's been torn up by the impact of the high-pressure water. Depending on the severity of the "fuzz," you can do this with a stiff nylon brush, or you may need to actually sand the deck.
If you have to sand it, first make sure the deck is completely dry. Then I would suggest starting with 40- or 50-grit paper and working up to 80- to 100-grit. Don't go any finer then that, as this will actually smooth out the wood too much and lessen the ability for the finish to penetrate. Depending on the size of your deck, you may want to use an electric random orbit sander, or rent a larger flooring sanding and then use the random orbit to finish up in those areas you can't get to effectively with the larger machine.
Remove the sawdust with a soft push broom, and then follow with a leaf blower or similar blower to get the wood as clean as possible. Finally, I would recommend a penetrating stain with UV inhibitor that is formulated specifically for decks. Talk to the folks at an experienced paint store for their recommendations (I would typically avoid the home centers for advice on something like this), and be sure to tell them about the Thompson's, as that may affect the penetration of any new product you apply.
Initially, you will probably need two applications of stain to get the color and protection you want. After this initial treatment, in the future I would maintain the deck with a fresh application of stain every two years.
Q: I very much enjoyed your deck-cleaning article. Do you have any brand-name product recommendations for deck cleaning? --Lee G.
A: Over the years, I've had very good success with deck maintenance products from the Wolman company, which are sold at many home centers and paint stores. You can check out their entire product line, along with specific details on what product is used for what application, by visiting their Web site at www.wolman.com.
Q: I have a complicated deck-cleaning question. I have an untreated cedar deck, which is on a houseboat directly over the river. How can I safely clean it without getting toxic material into the water? Thanks for the advice! --Jean F.
A: As to what specific product to use on the deck that's over the river, I contacted Wolman's technical representatives and posed the question to them. They recommended one of their products called DeckBrite in powdered form, which is safe for use in and around water.
Q: I have a large, ground-level cedar deck and prefer not to use any harsh chemicals to clean it because I have flowers and other vegetation around it. Can I use vinegar and water, or perhaps a biodegradable soap? --Barbara D.
A: For periodic light cleaning of your deck, I would suggest trying a powdered, biodegradable laundry soap mixed with water and applied with a long-handled, nylon brush. Sweep the deck first and try not to overly saturate the wood while cleaning. Rinse with clean water, using a garden hose with a wide spray nozzle.
After the deck is clean and dry, I would strongly recommend treating the cedar with a penetrating stain with UV inhibitor. This will maintain the deck's color, and will help prevent breakdown of the wood fibers (fibers that break down will trap more dirt and over time will make the wood harder and harder to clean). Incidentally, there are a number of colors available in penetrating stains, ranging from natural for new decks to gray, which is ideal if your cedar has grayed over time and you like that tone.
Remodeling and repair questions? E-mail Paul at paul2887@ykwc.net.
***
What's your opinion? Send your Letter to the Editor to opinion@inman.com.
All rights reserved. This article may not be used or reproduced in any manner whatsoever, in part or in whole, without written permission of Inman News. Use of this article without permission is a violation of federal copyright law.


You must login or register to post a comment.
Submitted by Elliot Reichert on March 17, 2008 - 11:55am.
I'm not one to plug a product but I wanted to add my two cents. First, thank you for a very well written and informative article. I own a deck building company in New Jersey (I am also very involved in real estate investment). I'm almost embarassed to say that though we build 150 custom decks per year I know little about restoring or maintaining them. I did this same search two years ago and came across recommendations for Wolman's products also. A customer of mine came across a product called Restore-A-Deck and ordered their cleaning system. Long story short, we used the products and found them better than the Deck Brite we had been using. One area the Deck Brite fell short was in removing mold and old stain 100%. This other product handles these tasks much more efficiently (while still being enviromentally friendly. I spoke to the company owner and had a lengthy conversation (excellent customer service)about the differences between the two products. I've ben using the Restore-A-Deck ever since.
I don't know if you have ever heard of it or have tried it but its worth a look. I wouldn't usually bother singing the praise of a manufacturer but like I mentioned, a good customer service experience coupled with a solid product is worth a mention in today's world. Here is a link to their website http://www.restore-a-deck.com I do apologize if posting the link violates the rules here. Please feel free to delete that portion of my post if it does.