Tips for high-quality paint job

Q: I've been putting off painting my house for years. It should have been done five years ago, but with one thing or another, it just didn't happen. I guess now I'm going to pay the price.

My house has a combination of stucco and wood siding. When I rub my hand on the wood and the stucco, I get a chalky residue. There are areas on the shady side of my house that have brown spots and other areas of the wood trim that are blistering. I'm going to do this job myself to save some money. Could you give me some pointers on how I can do a good job so I won't have to redo it anytime soon?

A: Kevin began his career as a painter in Alameda, Calif., rejuvenating some of that city's fine Victorians. Invariably, the wood was old and dry, and the paint was in bad shape. Most looked more like the Bates Motel than the classic "painted ladies" that they truly are. He spent many a day scraping, sanding and priming before he could finally put the color on and bring them back to elegant life.

The key to a long-lasting exterior paint job is meticulous preparation and high-quality materials. Because your home was built in the late 1960s or early 1970s, the paint is most likely acrylic latex. You've identified three problem areas you must address to get a quality job.

• The chalk is the result of oxidation of the surface. It must be removed to allow the new paint to adhere to the surface.
• The brown spots are mildew. If you don't kill it, the mildew will bleed through the new work.
• The blisters on the trim are the result of sun heating moisture in the wood and bubbling the paint off. Scraping and sanding are in order here.

The first step to prepare the surface is to clean it. The quickest and easiest way is with a pressure washer. The water blasts away dirt, chalk and loose paint. Pressure washers are a little tricky to operate, especially on wood. The stream of water can be adjusted from a pencil-like stream to a wide fan. Wash any areas with mildew with a 3-to-1 mixture of water to household bleach. Two passes should do the trick. An additive designed to kill mildew is available to use with the pressure washer.

Start on an out-of-the-way corner of the building until you get the hang of it. Pull the trigger (there will be quite a kickback) and move the wand over the wall in a consistent side-to-side pattern. Use a fan setting to avoid damaging the wood or stucco.

Pressure washers are available at rental centers and often at Lowe's and Home Depot. Make sure to ask the salesperson for a quick tutorial on operating the machine. ...CONTINUED

All rights reserved. This article may not be used or reproduced in any manner whatsoever, in part or in whole, without written permission of Inman News. Use of this article without permission is a violation of federal copyright law.